Tascam CD-RW900CD Owner's Manual

Also see for CD-RW900: Consultant’s Specification Technical information Specifications Specifications Owner's manual

28 TASCAM CD-RW900Titles can be given to the disc and the tracks on thedisc, using the TEXT EDIT option on the TEXT sub-menu.NOTEAfter the title is selected and entered on the disc, andTOC lights up on the dis-play, if the power is turned off,the TOC will not be recorded onto the disc, and thetitles will not be added.Follow the guidelines below to input titles on the screen.Operate them when in the text edit mode.It is more efficient to connect a keyboard for title input (refer to “Title input by keyboard” on page 29).≠ Select the type of character for inputPress the DISPLAY key on the unit or the remotecontrol to select from two different types of charac-ters.Lower case letters/code: no indicationCapital letters/code: CAPS≠ Input procedureRotate the MULTI JOG dial or the SKIP keys on theremote control to get the desired characters on thedisplay.Push the MULTI JOG dial or press the ENTER keyon the remote control to enter.≠ To move the cursor positionUse the ∆/ ˙ key and the ˚/ ¥ key on the frontpanel, or the SEARCH key on the remote control.≠ To delete charactersPlace the cursor on the character, then press theERASE/DEL key on the front pane, or the ERASEkey on the remote control.≠ To insert charactersMove the cursor to the location where you wish toinsert a character, and press the FINALIZE/INS keyon the front panel or the FINALIZE key on the re-mote control.≠ To change a characterPlace the cursor on the character to be changed,then input the desired character.NOTE≠ As with the TEXT menu, after the name is set, ifthe disc is tried to eject without writing TOC on thedisc, the display will show Sure? Text!. If you wantto eject the disc without TOC writing, press OPEN/CLOSE key during the Sure? Text! is shown on thedisplay. The text that have been edited or enteredwill be erased.≠ The disc or track title of the fainalized disc cannot beedited. Unfinalizing (CD-RW only) is needed to oper-ate the title input function.Title input operationDisc title input1 During stop, select the TEXT EDIT option in theTEXT sub-menu (refer to “Operation basic” on page14).Text> Disc will appear.2 Press the MULTI JOG dial or the ENTER key on theremote control.Now, you can input or edit the disc title following theguidelines above.3 Press the MENU key to enter.If you want to cancel, press the STOP key.Track title input1 During stop, select the TEXT EDIT option in theTEXT sub-menu (refer to “Operation basic” on page14).2 Rotate the MULTI JOG dial or repeatedly press theSKIP keys on the remote control to select the tracknumber you desire to title.3 Push the MULTI JOG dial or press the ENTER keyon the remote control.Now, you can input or edit the track title followingthe guidelines above.4 Press the MENU key to enter.If you want to cancel, press the STOP key.7−Titling