6 TASCAM CD-RW900Rack-mounting the unitIf you are mounting the unit in a rack, leave 1U of spaceabove it and 4 inch (10cm) or more of space at the rear.Use the rack-mounting kit to mount the unit in a stan-dard 19-inch equipment rack, as shown in this section.Remove the feet of the unit before mounting.Thank you for your purchase of the TASCAM CD-RW900 CD rewritable recorder.Before connecting and using the unit, please take timeto read this manual thoroughly to ensure you under-stand how to properly set up and connect the CD-RW900, as well as the operation of its many useful andconvenient functions. After you have finished readingthis manual, please keep it in a safe place for future ref-erence.NOTEThis product is designed to help you record and repro-duce sound works to which you own the copyright, orwhere you have obtained permission from the copyrightholder or the rightful licensor. Unless you own the copy-right, or have obtained the appropriate permission fromthe copyright holder or the rightful licensor, your unau-thorized recording, reproduction or distribution thereofmay result in severe criminal penalties under copyrightlaws and international copyright treaties. If you are un-certain about your rights, contact your legal advisor.Under no circumstances will TEAC Corporation be re-sponsible for the consequences of any illegal copyingperformed using the CD-RW900.1 − IntroductionSupplied accessoriesIn addition to this manual, the CD-RW900 has beenpacked with the following:≠ RC-RW900 remote control unit................................. 1≠ AC power cable ........................................................ 1≠ AAA batteries for the remote control unit................... 2≠ A rack-mounting screw kit (screws and washers)...... 1Contact your TASCAM supplier if any of these items aremissing.About this manualIn this manual, we use the following conventions:≠ The names of keys and controls are given in thefollowing typeface: ERASE.≠ When the alphanumeric portion of the display showsa message, this is shown in the following typeface:Welcome.≠ If a preset indicator in the display (i.e. one whichcannot change, but is either on or off) is shown, this isshown as follows: RANDOM.≠ Selectable value (i.e. values of dB) or ON and OFFselection (i.e. SRC>XXX) is shown in the followingtypface: XXX.