Tascam DA-6400 Manual

Also see for DA-6400: Owner's manual

Contents

Tascam DA-6400 Manual Manual pdf 2 page image

DA-6400/DA-6400dp2 TASCAM DA-6400/DA-6400dpNew functions in firmware version 2.10The following new functions have been added in firmware version 2.10.0 A cascade function that allows simultaneous recording/playback operations on two units is now supported.0 The INFORMATION screen now shows the cascade status.Cascade function supportA cascade function is now supported. This allows simultaneous recording/playback operations with sample-precise synchronization ontwo units that are connected to the same network. Cascade operation of up to two units is possible with the following simultaneous re-cording/playback channel limits.0 When the sampling frequency is 44.1/48 kHz, up to 64 channels on 2 units (128 total channels)0 When the sampling frequency is 88.2/96 kHz, up to 32 channels on 2 units (64 total channels)Cascade function setupUse the CASCADE page added to the menu screen to make cascade function settings and check its status.CASCADE STATUSThis shows the cascade status.Cascade status ERROR/ALERT classification ContentsCascade OFF --- The cascade function is off.Offline(No Network) ERROR Cascade operation is not possible because it is not connected to anetwork.Offline(Duplicate Slave) ERROR Proper cascade operation is not possible because multiple units areset to the same cascade slave ID.Offline(Duplicate Master) ERROR Cascade operation is not possible because multiple units are set asthe cascade master.Comms Lost withSlave ALERT The cascade master is no longer able to communicate to one of thecascade slaves.Offline (NoSlaves) ALERT Cascade operation is not possible because no unit set to be a cas-cades slave could be found on the network.Offline (No Mas-ter) ERROR Cascade operation is not possible because no unit set to be the cas-cade master could be found on the network.Syncing... ERROR Cascade synchronization is being prepared.Waiting... ERROR The unit is waiting for cascade to be ready.OK (N active) --- Cascade synchronization is working properly for N number of units.