Tascam DA-6400 Manual

Also see for DA-6400: Owner's manual

Contents

Tascam DA-6400 Manual Manual pdf 29 page image

TASCAM DA-6400/DA-6400dp 29DA-6400/DA-6400dpSRCThis turns the sample rate converter on/off for each signal lineOptions: OFF (default value), ONNOTEi SRC cannot be set to ON for the signal line selected as themaster clock. In this case, the following pop-up window ap-pears.A confirmation pop-up message appears.i If an IF-AE16 is installed, depending on the main unit SRCitem setting and clock master setting, an error described as“SRC for the IF-AE16 signal line selected as the CLOCK MASTERis ON” could occur.In this case, the SRC item for that signal line will be turnedoff automatically and the INFO indicator will light red. In thissituation, press the INFO button to open the following alertmessage. Once this has been confirmed, it will disappear.i The INFO indicator lights red when an error has occurred withthe IF-AE16 input signal. In this situation, press the INFO but-ton to show the following information. Note that even if thereis an error with the input signal, it will not mute.Unlocked: The input signal is not synchronized with the mainunit.no signal: There is no input signal.not audio: The input signal Cbit data is “not audio”.Dual Line: The input signal Cbit data is “Dual Line”.Function added to synchronize with SMPTE timecode and play the current takeA function has been added to play the current take synchronizedwith the SMPTE timecode input through the TIMECODE IN con-nector on the back of the unit.A TC SYNC page has been added to the menu for this function.Setting timecode synchronized playbackUse the TC SYNC page to make timecode synchronized play-back settings.TC CHASE MODETurn timecode synchronized operation on/off.Options: OFF (default value), ONNOTEYou can also press the 9 [CHASE] button while pressing andholding the SHIFT button on the front of the unit to turn iton/off.TC CHASE OFFSETA timecode offset can be set for the input timecode.The setting range is from -23:59:59.29 to +23:59:59.29.Function (default value)TC RECHASE MODEThis turns on/off the resynchronization function for when syn-chronization becomes inaccurate during timecode synchro-nized playback.Options: OFF (default value), ONWhen set to OFF, after being synchronized once the inputtimecode is ignored and the unit operates in free run mode.When set to ON, rechasing will start when the synchronizationinaccuracy exceeds the threshold level set on the TC RE-CHASE THRESH screen.