10There are two locations called “Effect 1 and Effect 2” where these algorithms canbe loaded. The source of the inputs to Effects 1 and Effects 2 can be Aux sends1-6. Effect returns can be assigned to any of the 32 channels or directly to thestereo buss. Effects 1 and 2 can also be routed as “inserts” on busses 1-8; Auxsends 1-6 or the stereo buss.The internal effects can also be used with the “assignable” inserts. For instance,if a fretless bass is on channel 2 and chorus needs to be added to it, assign thechorus effect to assignable insert #1 and assign insert #1 to channel 2. Usingthe assignable insert saves an aux send and two return channels.Effect 1 and Effect 2 can also be run in series. This would allow you to run adelay into a reverb, for instance.Machine controlThe DM-24 can control a wide variety of external devices via RS-422 ( P2 or 9-pin), MIDI Machine Control or the DTRS remote jack. There is a list of supporteddevices on the machine control page.The DM-24 can control multiple devices simultaneously. A standard examplewould be controlling the transports of a VTR, while arming tracks on a DTRSmachine.