Tascam DM-4800 Manual

Also see for DM-4800: Manual Software guide Specification sheet Owner's manual Technical documentation

Effect parameter list10 TASCAM DM-4800 Effect listParameter Indicator Range Description RemarksCompressorlevel detectmodeCompMode RMS, Peak Determines whetherlevel detector uses peakvalue or RMS value tocalculate gain reduc-tion.Auto make-upgainAutoGain Off, On Turns on or off the func-tion that automaticallycorrect output gain levelreduced by compressor.Auto make-upgain biasAutoBias –100% - 100% (1% steps) Fine adjusts differencesin auto make-up gainamount between Peakand RMS compressorlevel detect modes, orbetween FeedForwardand FeedBack types.DE-ESSER FX2.0The De-Esser features a relative threshold functionthat allows the threshold to automatically changedepending on the input signal level. It also enablesyou to monitor each of three-band side-chain signals.Table 1.6: Stereo De-Esser parametersParameter Indicator Range Description RemarksMonitor source OutputMonitorAudio Path, Side Band Specifies whether tomonitor signal outputthat passed through de-esser, or to monitor side-band signal that wasremoved from input.Band 1 bias Filter1 Bias 0.0% - 100.0% (0.1% steps) Specifies how muchBand 1 (as a side chain)affects other bands.Band 2 bias Filter2 Bias 0.0% - 100.0% (0.1% steps) Specifies how muchBand 2 (as a side chain)affects other bands.Band 3 bias Filter3 Bias 0.0% - 100.0% (0.1% steps) Specifies how muchBand 3 (as a side chain)affects other bands.RelativethresholdRelativeThrsh–40 dB - 0.0 dB (0.1 dB steps) Specifies de-esserthreshold relative toinput level.You can apply de-esserto input signal regard-less of signal level.Maximum gainreductionMaxGainRdx –40 dB - 0.0 dB (0.1 dB steps) Specifies de-esser’smaximum gain reduc-tion value.Band 1high-pass filterfrequencyHiPass1Freq1.00 kHz - 10.00 kHz (1 cent steps) Specifies high-pass filtercorner frequency.Band 1