TASCAM DR-05 47The Quick menu screen appears.2 While listening to the input sound, use the or ¯ button to adjust the input level.When the  or ¯ button is pressed, apull-up window showing input level settingsappears in the display.CAUTION• If the Monitor Mix function is disabled, the pull-up windowwill not appear when pressing the  or¯ button.• When distortion of sound is about to occur as the inputsound level is increased, the PEAK indicator on the upper leftabove the display will be turned on. Adjust the input level forrecording so as not to allow the PEAK indicator to be turnedon.NOTEWhen input monitoring is ON and during overdub recording,the PEAK indicator lights when the combined input andplayback signals become higher than the set level.Start the overdubbing1 Press the RECORD [º] button to set the unitto record standby.The overdubbing ON/OFF pop-up appears.The recording file name, input source, recordingaudio file type and sampling frequency alsoappear so that you can confirm them before youstart recording.2 Use the + or - button to select ON from theoverdubbing ON/OFF pop-up.4–Recording
