88 TASCAM DR-05TASCAM DR-05 has a built-in tuner. The unit receives asound from a musical instrument and allows you to tuneit accurately on the tuning meter shown in the display.Using the tunerSetting the tuner1 Press the MENU button to open the MENUscreen.2 Use the + or − button to select OTHERS, and pressthe Á button to open the OTHERSsubmenu.3 Use the + or − button to select TUNER, andpress the Á button.TUNER screen appears.The TUNER screen contains the CALIB optionto set the fundamental frequency of the A.Press the  or ¯ button to decrease orincrease the fundamental frequency.Setting range: 435Hz - 445Hz (in 1Hzincrements, default: 440Hz)Tuning a musical instrument1 Open the TUNERscreen, and sound a notenear the unit.2 Tune the instrument so that the target pitchname appears and the center of the tuner lights.A bar appears on the left or right of the centerif the sound is lower or higher than the targetpitch. The bar becomes longer as the soundshifts away from the target pitch.Adjusting the input level for tuning1 Press the QUICK button to switch CALIBtoINPUTLEVELin the bottom of the TUNERscreen.2 Use the  or ¯ button to adjust the inputlevel. The pull-up display appears to show the inputlevel setting. See “Manually adjusting the inputlevel” on page 48 for the adjustment operation.8-Tuning a Musical Instrument (Tuner)
