TASCAM DR-05 87LEVEL:Use this to change the output level of the preseteffect selected in the PRESET item.Setting range: 0 - 20SOURCE:Use this to set whether the effect is applied tothe input signal (INPUT) or the output signal(OUTPUT).The default setting is OUTPUT.4 Use the + or – button to select the desireditem and press the Á button or ¯ buttonto access that item’s settings.5 Use the + or – button to set the desired value.6 Press the  button when you are donemaking the setting to return to item selectionstatus.7 Press the (HOME) [ª] button to return tothe Home Screen.CAUTIONWhen the sampling frequency is set to 96 kHz, or a WAV filewith a sampling frequency of 96 kHz is played, the built-ineffects do not work.However, you can still set the built-in effects.Effects Preset ListPreset name EffectsHALL 1 (Default) This is a bright reverb modeledafter a large hall-like space.HALL 2 This is a warm reverb modeledafter a large hall-like space.ROOM This reverb is modeled on asmall indoor space.STUDIO This reverb is modeled on astudio-like space.PLATE 1 This is a bright plate reverb.PLATE 2 This is a warm plate reverb.8-Using the Effects
