14 TASCAM DR-1003–Names and Functions of PartsRight side panel9 Battery compartment(specialized lithium ion battery)Compartment for the unit’s dedicated lithium ionbattery. (See “Using the lithium ion battery” onpage 17.)K INPUT LEVEL knobAdjusts the input volume. (See “Adjusting theinput level” on page 27.)Left side panel< USB portConnect to a computer using the included USBcable. (See “8–Connecting with a Computer” onpage 37.)> DC IN 5V connectorConnect a PS-P520 AC adapter (sold separately).Do not connect any other type of AC adapter.? HOLD switchShift in the direction of the arrow to engagethe hold function, which prevents unintentionaloperation.@ POWER keyPress and hold to turn the power ON and OFF.B /SP OUTPUT volumeUse to adjust the volume output from theheadphones.C ConnectorUse to connect headphones. (See “Connectingmonitors and headphones” on page 21.)D LINE OUT connectorUse a stereo minijack cable to connect to the lineinput connector on an external device. (See “Con-necting monitors and headphones” on page 21.) LINE IN connectorUse a stereo minijack cable to connect to the lineoutput connector on audio equipment or otherexternal device. (See “Recording an externaldevice (LINE)” on page 26.)Front panelR XLR MIC IN connectorsConnect external mics (See “Recording withexternal mics (XLR)” on page 26.)P REMOTE connectorConnect the included wired remote control. (See“Using the remote control” on page 19.)a track. (See “Using the wheel to change theplayback position” on page 33.)G INPUT selection switchSet to the desired input signal source. (See“Setting the input” on page 25.)H PB CONTROL keyUse to open and close the playback control screenand to turn its functions ON and OFF. (See“Adjusting the playback speed (PB CONTROL)”on page 36.)