Tascam DR-100 Owner's Manual
Also see for DR-100 MKIII: Guide to usingComparison chartOwner's manualService manualOwner's manual
                                                    | |
Contents
| 
50 TASCAM DR-10012–SpecificationsAudio input ratingsº XLR MIC IN (L, R) inputsConnectors: XLR-3-32equivalent (balanced)Input impedance: 1.2 kΩ≠ GAIN HIGH settingStandard input level: -58 dBuMaximum input level: -42 dBu≠ GAIN MID settingStandard input level: -36 dBuMaximum input level: -20 dBu≠ GAIN LOW settingStandard input level: -14 dBuMaximum input level: +2 dBuº LINE IN inputConnector: 3.5 mm stereo minijackInput impedance: 23 kΩStandard input level: -10 dBVMaximum input level: +6 dBVº LINE OUT outputConnector: 3.5 mm stereo minijackStandard output level: -10 dBVMaximum output level: +6 dBVº outputConnector: 3.5 mm stereo minijackMaximum output : 25 mW + 25 mW(with 32 Ω headphone connection)º Built-in speakersOutput: 0.4 WAudio performanceFrequency response (LINE IN > LINE OUT):20 Hz–20 kHz, +1/-3 dB (44.1 kHz)20 Hz–22 kHz, +1/-3 dB (48 kHz)Distortion (LINE IN > LINE OUT):Less than 0.01%S/N ratio (LINE IN > LINE OUT):90 dB or moreº Compatible audio files:MP3 files: 32–320 kbps, sampling frequency 44.1/48 kHz,VBR playback, ID3 tag support up to Ver 2.4WAV files: sampling frequency 44.1/48 kHz,bit length: 16/24-bitº Recording media:SD cards (64 MB–2 GB) and SDHC cards (4 GB–32 GB)º File system:FAT partition: FAT16/32º Battery life (continuous operation):Lithium ion battery (BP-L2):About 5 hours (recording time)About 5 hours (playback time)Ni-MH batteries (HR15/51):About 4 hours (recording time)About 4 hours (playback time)Alkaline batteries (LR6):About 2 hours (recording time)About 2 hours (playback time)(Backlight off, set to 128-kbps mp3.Varies according to use conditions.)º Operation temperature range:0–40º Cº Power consumption:1.7 W (MP3 playback)5.5 W (maximum)º External dimensions (mm):80 (w) x 153 (h) x 35 (d) (excluding protrusions)º Weight:290 g (not including batteries)Accessory (sold separately)º AC adapter:PS-P520Requirements for connectedcomputersº Windows:Pentium 300 MHz or better128 MB or more memoryUSB port (USB 2.0 recommended)º Macintosh:266 MHz Power PC, iMac, G3, G4 or better64MB or more memoryUSB port (USB 2.0 recommended)º Recommended USB host controller:Intel chipsetº Supported OS:Windows: Windows 2000 Professional SP4 or newer,Windows XP, Windows VistaMacintosh: Mac OS X 10.2 or newer |
Related manuals for Tascam DR-100 MKIII
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine