TASCAM DR-100 194–Preparation for UseUsing the remote controlWireless usePoint the remote control at the remote controlreceiver on the unit.CAUTIONIf anything is between the remote control and thereceiver, operation might not work.Remote control receiverOperation distanceWired useAttach the remote control adapter and cable1 Insert the wireless remote control into theremote control adapter.2 Connect the cable to the remote control adapter.3 Connect the cable to the main unit.Precautions for use of the remote controlRemove the battery when you are not using theremote control for a long time (one month ormore).If the battery should leak, thoroughly clean anyresidue from inside the battery compartment andinstall a new battery.When using other devices controlled by infraredrays, use of this remote control might operatethese devices by mistake.
