58 TASCAM DR-404 – RecordingAdding marks automatically to a recordingThis function allows the unit to add marks automatically usingAUTO REC.On the REC SETTING screen, set the AUTO REC sectionMODE item to MARK.See “Recording automatically (AUTO REC)” on page 55.Moving to a mark positionYou can move to marks in the currently selected file whenstopped and during playback.You can use this function to identify points to create shortcutsto the beginning of songs, for example.Press the . or / button while pressing andholding the ENTER/MARK button during playback orwhen stopped.NOTEYou cannot move to a mark in a different file.Setting the low cut filterThe low cut filter can reduce noise such as offensive windnoise from air-conditioners and projectors.1 Press the MENU button to open the MENU Screen.2 Use the + or − button to select REC SETTING, and pressthe ENTER/MARK or / button.REC SETTING screen appears.3 Use the + or − button to select LOW CUT, and press theENTER/MARK or / button.4 Use the + or − button to select the cut off frequency of thelow cut filter for mic input.Options: OFF (default), 40Hz, 80Hz, 120HzCAUTION• When an external input is selected, the low-cut filter cannotbe used.• Use headphones to monitor when you are recording witha microphone. If you use speakers to monitor, the soundoutput from the speakers may also be recorded, causing apoor recording and even feedback.
