Tascam DR-701D Reference Manual

Also see for DR-701D: Owner's manual Manual Owner's manual

TASCAM DR-701D 193 – PreparationMonitoringYou can monitor the input signals when the unit is stoppedusing headphones, for example.Selecting the monitored signals1. When the Home Screen is open and the unit is stopped,paused, in recording standby or recording, press theMONITOR button to open the MONITOR SELECT screenwhere you can select which signals to monitor.2. Turn the DATA dial to select which signals to monitor.Option MeaningMIX Monitor a stereo mix.CH1 Monitor the channel 1 input sound.CH2 Monitor the channel 2 input sound.CH3 Monitor the channel 3 input sound.CH4 Monitor the channel 4 input sound.CAMERA IN Monitor the IN jack signal.CH1-2 Monitor a mix of channels 1-2.CH3-4 Monitor a mix of channels 3-4.HDMI1* Monitor the HDMI 1 input sound.HDMI2* Monitor the HDMI 2 input sound.HDMI3* Monitor the HDMI 3 input sound.HDMI4* Monitor the HDMI 4 input sound.HDMI5* Monitor the HDMI 5 input sound.HDMI6* Monitor the HDMI 6 input sound.HDMI7* Monitor the HDMI 7 input sound.HDMI8* Monitor the HDMI 8 input sound.HDMI1-2* Monitor a mix of HDMI 1-2.HDMI3-4* Monitor a mix of HDMI 3–4.HDMI5-6* Monitor a mix of HDMI 5-6.HDMI7-8* Monitor a mix of HDMI 7-8.* The HDMI options appear when HDMI is synchronized.NOTEThe monitoring options depend on the recording modesetting.3. When finished selecting the monitored signals, press theDATA dial or MONITOR button to return to the HomeScreen.NOTEWhen CAMERA IN is selected, you can monitor the inputsound through the PHONES jack, but the level meters willshow the input sound according to the recording mode.Using the accessory shoe on the toppanelTo use the accessory shoe on the top panel, remove the DSLRattachment bracket.You can install the camera attachment bracket screw hole coversto the screw holes.