Tascam FW-1884 Notes

Also see for FW-1884: Brochure Manual Owner's manual How to install Quick start guide

Contents

Digital Performer (Macintosh): Aux Busses10 TASCAM FW-1884To Change the Master Fader Assignment• You can switch the master fader assignment tothe next or previous virtual master output byholding down the SHIFT and CTRL key whileyou press either the BANKt or gBANK key.While SHIFT and CTRL are held down, theBANK indicators show which virtual masterfader is assigned (see “Changing the MasterFader Assignment” on page 5).To Control Track Volume• Move the track fader to control its volume. • Hold CTRL and press the track SEL key to setthat track's level to unity.To Control Track Pan1 Press the PAN key in the PAN/AUX key group.2 Move the track encoder to adjust the track's bal-ance left or right.NOTEHold SHIFT for finer adjustment resolution.Hold CTRL and turn the encoder to set the trackpan to the center.To Flip Fader and Encoder ControlPress the FLIP key. This toggles Flip on/off.• When Flip is off:Faders control track levels.Encoders control track pans.• When Flip is on:Faders control track pans.Encoders control track levels.• When Flip is on and an AUX 1-4 key is selected:Faders control AUX send levels.Encoders control track levels.Aux BussesYou can use the AUX 1-4 keys on the FW-1884 to con-trol aux send parameters on each track for up to 4 auxbusses. Select the AUX key (1-4) and then follow thesteps below.To Control Aux Send Level on a Track• Move the encoder to change the send level. Hold down SHIFT down for finer resolution.To Mute Aux Send on a Track1 Re-press and hold the active AUX key. 2 Press the track MUTE key to mute or unmuteaux send on that track.