Tascam FW-1884 Notes

Also see for FW-1884: Brochure Manual Owner's manual How to install Quick start guide

Contents

Digital Performer (Macintosh): Recording8 TASCAM FW-1884RecordingThe DP record functions that the FW-1884 can con-trol are recording, punch recording, and automationrecording.To Record1 Arm a track by holding the REC key (above theEQ Encoders) and pressing the SEL key on thedesired track.2 Move the Now time to where you want to startrecording.3 Press the transport RECord key to start record-ing. Alternatively, you can use the footswitch.4 Press the STOP key to stop recording, or clickthe footswitch again.Disarm Track Record.• All armed tracks can be disarmed by pressing theALL SAFE/F3 key.or• by holding SHIFT and pressing the REC key.To Set Punch In/Out from current Selection1 Move the Now time to the desired start point.2 Hold SET and press the IN key.3 Move the Now time to the desired end point.4 Hold SET and press the OUT key.To Toggle AutoPunch Mode• Hold SHIFT and press the IN key.To Perform Record Automation• Hold the WRT key and press a track SEL key toarm that track for automation recording.Automation writing is determined by the Touch-Write function of DP while the transport isrolling.• Press the STOP key to stop automationrecording.Hold SHIFT and press WRT to disable all recordautomation tracks.To Change Automation Touch Mode1 Arm the track for Write Automation.2 Hold TCH and press the track's SEL key.The track's on-screen automation mode will tog-gle between Touch and Trim Touch modes.To Change Automation Latch and Overwrite Mode1 Arm the track for Write Automation.2 Hold LATCH and press the track's SEL key.The track's on-screen automation mode will tog-gle between the Latch, TrimLatch, and Over-write mode.