Digital Performer (Macintosh): FW-1884 Control Listings12 TASCAM FW-1884FW-1884 Control ListingsModifier KeysThere are five primary modifier keys on the FW-1884.They are used to provide additional functionality withthe FW-1884 control surface keys and knobs. They arealso used to send virtual key modifiers to DP in orderto access additional features which might normallyrequire a keyboard.Surface Keys and KnobsThe following table lists the keys and knobs on theFW-1884 and what they are used for. The normalmode of operation (no modifier keys) is indicated witha "-"in the Modifier column.In some cases what has been silkscreened on the FW-1884 differs from the functionality in DP. For thosecontrols the original silkscreened name appears inparenthesis.KEY ACTION NOTESSHIFT Key & Control Modifier DP virtual SHIFT KeyCTRL Key & Control Modifier DP virtual CTRL KeyCMD (no surface modifications) DP virtual Command keySET Transport CTRL Modifier Used when setting values (e.g. marker, punch in/out)KEY/KNOB MODIFIER ACTIONFLIP - Toggles Encoder/Fader mappingPAN - ENCODER knob adjusts Track panAUX 1-4 - ENCODER knob adjusts Track Aux send level(held down) MUTE - toggles send muteCONTROL PANEL - Opens the FW-1884 Control PanelSAVE/F1 - Save current projectREVERT/F2 - N/AALL SAFE/F3 - Disable Record on all channelsCLR SOLO/F4 - Unsolo all tracksSHIFT Unmute all tracksMARKER/F5 - Drop Marker at current time ((Also dropped using SET and LOCATE >>)LOOP/F6 - Toggles Memory Cycle on/offCUT - Cut the current selectionDELETE - Delete current selectionCOPY - Copy current selectionPASTE - Paste previously copied selectionUNDO UndoSHIFT Redo