TASCAM GB-10 8316-Using the footswitchThis unit has a REMOTE jack to which you can connecta TASCAM RC-3F footswitch-type remote control (soldseparately) that can be used to operate the unit.Setting footswitch operationUse the “FOOT SW” setting screen to make footswitch settings.1. Press the MENU button to open the MENU screen.2. Use the §/BROWSE and ¶/ buttons to select the“FOOT SW” menu item, and press the Á button or ¯button to open the FOOT SW screen.3. The “MODE” item and the three footswitch pedalassignments are shown.4. Use the VALUE (+/–) buttons to change the “MODE”item.MODE FOOT SWL C RPLAY REW PLAY/STOP FWDTRAINER FLASH PLAY/STOP SPEED CHANGEEFFECT PRESET − PLAY/STOP PRESET +RECORD OVERDUB REC/PAUSE STOPMINUTES REW PLAY FWD5. After completing the setting, press the HOME button toreturn to the Home Screen.Using the footswitchPress a pedal on the footswitch to operate the unit. Thefunction of each pedal corresponds to the assignment shownon the FOOT SW screen.
