Tascam HD-P2 Release Notes
Also see for Frontier HD-P2: Technical informationComparison chartOwner's manualOwner's manualAddendum manual
         | |
SoftwareTimecode LED BehaviorIn order to make it easier to know what timecode/transport state the HD-P2 is in at aglance, the TIMECODE LED behavior has been changed as below compared to what isdescribed in the Owner’s Manual.LED State Comment----------------------------Off TC key disabled, non-timecode operationFast Blink TC key enabled, bad LTC and TC Gen not runningTransport can't runSlow Blink TC key enabled, good LTC or TC GenTransport StoppedOn TC key enabled, good LTC or TC GenTransport running• Whenever the TC LED is off or fast blinking, timecode isn't being used.• When the TC LED is blinking slowly or on, then TC is good but the Transport isstopped.• When TC is good and the transport is engaged (play, record, or waiting fortrigger) the LED is on solid.Creating A New ProjectFollowing are the steps to create a new project:1. Go to the Change/New Project screen• MENU + PROJECT from the top panel• “N” from a PS/2 keyboard2. Select Create New Project3. Select the project template to use4. Name the new project5. Confirm• SELECT from the top panel• ENTER from a PS/2 keyboardJam SyncIn the Timecode Settings window, there is setting to enable/disable Jam Sync. Thisessentially sets the HD-P2 to operate as if Infinite Freewheel is enabled. It should benoted that a “re-jam” (connection of a timecode source) will not interrupt a play or recordoperation. Re-jamming timecode must be done with the HD-P2’s transport in Stop.When Jam Sync is enabled, it is not possible to enter the Freewheel menu. |
Related manuals for Tascam Frontier HD-P2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine