Tascam HD-P2 Release Notes
Also see for Frontier HD-P2: Technical informationComparison chartOwner's manualOwner's manualAddendum manual
         | |
Disk StatusThe display and icon in the lower right of the LCD screen displays the time remainingavailable to record on the inserted media at the selected sample rate and bit depth inHH:MM format. Momentarily holding STOP will display the actual space remaining onthe mediaReset to Factory DefaultsUnder the Default Project Settings menu there is a selection to initialize all of the HD-P2’s settings to their factory defaults.Pull Up/Down Sample Rate SettingsA pull up/down sample rate is always relative to the chosen time code rate.For example, when it is required to chase 30fps LTC but the project will eventually bepulled down to 29.97, a 30 Pull Up setting would be used providing an operating samplerate of the selected sample rate plus 0.1% while chasing 30fps LTC. Later, when chasing29.97, the sample rate will be normal.The following 0.1% pull up/down rates are supported by the HD-P2:23.976 Pull Down24.00 Pull Up24.975 Pull Down25.00 Pull Up29.97 Pull Down30.00 Pull UpIf 1% or 4% pull up/down rates are required, the HD-P2 must be locked to an externalclock source providing that rate.Pre-RecordThe pre-record buffer is not active when the HD-P2 is set to chase timecode. |
Related manuals for Tascam Frontier HD-P2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine