Tascam Portastudio MF-P01 Owner's Manual

Also see for Portastudio MF-P01: Supplementary guide

Contents

Tascam Portastudio MF-P01 Owner's Manual Manual pdf 12 page image

12 PORTASTUDIO MF-P014) Adjust the recording level for track 2, in the same way as shown above (see"Setting the level").Use the LEVEL and PAN controls for track 1 to control the track 1 sound.Use the MASTER control to adjust the overall monitor level.5) When you are ready, press the REW button to rewind the tape and press theRECORD button to start recording.6) Press the STOP button to stop recording.7) Press the REW button to rewind and press the PLAY button to start playback.Adjust the level and pan position of the two tracks with the LEVEL and PANcontrols for tracks 1 and 2.8) If you are not satisfied with your recording, try again.The MF-P01 has 4 tracks. You can record two more musical tracks (another guitarpart, harmony vocals, bass, etc.) to tracks 3 and 4, in the same manner describedabove, while monitoring the previously recorded tracks.Recording tracksAfter completing recording, the next (final) process is "mixdown". We assume that allthe four tracks are recorded.Setting up1) Unplug the stereo headphones.NOTEWhen headphones are plugged in, the audio performance from the LINE OUT jacksis slightly degraded.WARNINGBefore making the connections below, make sure that all equipment is turned off.2) Connect the LINE OUT jacks of the MF-P01 to the AUX IN (or TUNER IN,CD IN, TAPE IN, etc) of your amplifier.3) Connect the master recorder to the amplifier appropriately (see page 6).4) Set the amplifier’s input source to the MF-P01 and the level volume appropri-ately.NOTEYou may directly connect the MF-P01 LINE OUT jacks to the recorder’s line inputjacks without using any amplifier.Mixing down tracks