Tascam Portastudio MF-P01 Owner's Manual

Also see for Portastudio MF-P01: Supplementary guide

Contents

Tascam Portastudio MF-P01 Owner's Manual Manual pdf 7 page image

PORTASTUDIO MF-P01 71 DC IN 12 V connector and POWER switchUse this jack to connect the PS-P2 AC adaptor which comes with your MF-P01.When connecting the power, make sure the power switch is off (slide it to the right, as you look from theback).Slide the switch to the left (looking from the back) to turn on the power to the MF-P01.WARNINGDO NOT use any adaptor with the MF-P01 except the PS-P2 adaptor which comes with the MF-P01.NOTEThe equipment draws nominal non-operating power from the AC outlet with its POWER switch in the offposition.2 MIC/LINE jackUse this 1/4" phone jack to connect an audio source (instrument or microphone) to the MF-P01.The source signal is sent to a recording track, as well as fed from the LINE OUT (L, R) and PHONES jacks.3 PHONES jackUse this 1/4" jack to connect a pair of stereo headphones to monitor tape playback or/and MIC/LINE inputsignals.CAUTION• When using the LINE OUT jacks, to obtain better audio performance, unplug headphones.WARNING• Do not use headphones equipped with a mono jack. This will cause damage to the MF-P01’s headphoneamplifiers.4 LINE OUT jacksUse these RCA (pin or phono) jacks to connect your MF-P01 to the amplifier or master recorder.Tape playback or/and MIC/LINE input signals are output from these jacks.Parts of the MF-P01