TASCAM SS-CDR200/SS-R200/SS-R100 27NOTEThe screen above is an example from an SS-CDR200.SS-R200 and SS-R100 models do not have the CD menu.2 Press the DEVICE button (or remote control DEVICESELECT button) to select the device to use, andpress the MULTI JOG dial (or remote control ENTERbutton) to confirm.NOTEYou can also turn the MULTI JOG dial to select the device.3 The name of the selected device appears at thebottom right of the Home Screen.Device nameUSB: Select USB memorySD: Select SD cardCF: Select CF cardCD: Select CD with commercial audio CD (SS-CDR200only)CDR: Select CD with CD-R (SS-CDR200 only)CDRW: Select CD with CD-RW (SS-CDR200 only)Preparing USB/SD/CF media for useYou must format USB/SD/CF media with this unit in orderto make them usable by the unit.CAUTIONFormatting will erase all data on the USB/SD/CF media.•Always format with this unit. If USB/SD/CF media is•formatted by another device or a computer, it couldaffect operation of the unit.1 Press the DEVICE button (or remote control DEVICESELECT button) to open the DEVICE SELECTscreen, and select the device with the media thatyou want to format. (See “Selecting the deviceused” on page 26.)2 Press the MENU [JOG] button (or remote controlMENU button) to open the MENU screen.3 Open the UTILITY menu.4 Select MEMORY FORMAT.5 Press the MULTI JOG dial (or remote control ENTERbutton).A confirmation pop-up message appears.6 Press the MULTI JOG dial (or remote control ENTERbutton) again to start formatting.During formatting, --FORMAT-- and a progress baris displayed in a pop-up.7 After formatting completes, the pop-up disappearsand the UTILITY menu reopens.8 Press the HOME/DISPLAY button (or remote controlHOME/DISP button) to return to the Home Screen.Panel lock functionWhile pressing and holding the SHIFT button, press the, [LOCK] button to turn the panel lock function, whichdisables operation of the front panel buttons, ON and OFF.When panel lock is ON, using any front panel buttons(except the SHIFT and , [LOCK] buttons) or remotecontrol buttons will cause a --Key Lock-- and ONpop-up to appear.NOTEEven when panel lock is ON, control is still possible whenusing a TASCAM RC-3F footswitch connected to the frontpanel REMOTE JACK or an external device connected toone of the rear panel RS-232C, PARALLEL or REMOTE IN(RC-SS2) CONTROL I/O connectors.3 − Preparations