Tascam US-1200 Owner's Manual

Also see for US-1200: Quick start guide Release notes

Tascam US-1200 Owner's Manual Manual pdf 18 page image

18 TASCAM US-12005 – Mixer Panel SettingsStereo MixUse this setting if you want to broadcast or recorda stereo mix, for example when transmitting a livebroadcast over the Internet or recording audio forvideo. You can also use it when you want to recorda mixed stereo track using the functions of the DSPmixer.The signals input from all the input connectors andthe signals sent from the computer by USB will bemixed and sent to all the output connectors and thecomputer.Signals are output from the mixer in stereo and canbe heard on headphones as well as speakers or otherequipment connected to the output jacks.Mic GuitarComputerHeadphonesLive InternetbroadcastMixerFor details about the audio flow in Multitrack and Stereo Mixmodes, see “Audio flow diagram” on page 33.NOTEBe aware of the following when using the unit in StereoMixed mode.When broadcasting live over the Internet, for example, thesound could loop, creating an echo-like effect. To avoid this,set the volume in the application that you are using to zero(0).Volume (0)MIXER pageMake built-in mixer settings on the MIXER page.The contents of this screen depend on the Mixer Mode settingon the INTERFACE page.NOTEAll settings (except for SOLO buttons) made on the MIXERpage are retained even when the unit is turned off (andrestarted). The SOLO buttons are reset to their defaultvalues (off) whenever the unit is turned off (and restarted).1 Selection buttons for dynamics effectsClick a dynamics effect name to select and use it.Only one dynamics effect can be used at a time.OptionsOff (default): Effect names unlitCOMPRESSOR: Effect name litNOISE SUPPRESSOR: Effect name litDE-ESSER: Effect name litEXCITER: Effect name litEQ: Effect name litTo change the dynamics effect being used, click thebutton of the desired effect. The previously used effect willautomatically be turned off, and the newly selected effectwill be turned on.NOTE• Selection will not be possible when an effect cannot be useddue to sampling frequency limitations.• Turning the dynamics effect on/off using these buttons islinked to the dynamics effect on/off setting on the EFFECTpage.2 Dynamics effects assignment buttonsClick a channel button or the MASTER L/R button to applythe dynamics effect to that channel or channel pair.You cannot assign the dynamics effect to more than onechannel at a time.OptionsOff (default): Channel name button unlitOn: Assigned channel name button litTo change the channel to which the dynamics effect isassigned, click the channel name button of the desiredchannel. The previously assigned channel name button willbecome unlit, and the newly assigned channel name buttonwill light.