Tascam US-1200 Owner's Manual
Also see for US-1200: Quick start guideRelease notes
                                    | |
Contents
| 
8 TASCAM US-12002 – Names and Functions of PartsRear panel9 USB portUse the included USB cable to connect the unit to acomputer. (Only USB 2.0 is supported.)CAUTION• USB 1.1 is not supported.• When connected to a USB 3.0 port, it will function in HighSpeed mode equivalent to USB 2.0 (480 Mbps maximum).• This unit does not support computer suspend (sleep) mode,so the unit might not function properly after this modeends. If this occurs, put the unit into standby mode and turnit on again or disconnect and reconnect the USB cable.0 OUTPUT (BALANCED) L/R jacksThese are standard balanced TRS jacks for analog monitoringoutput.These output the signals set by the LINE OUTPUTS item onthe INTERFACE page of the Mixer Panel.Use the MON knob on the front of the unit to adjust theoutput level.Connect monitor speakers, for example, to these jacks.(Tip:HOT, Ring: COLD, Sleeve: GND)q DC IN 12V connectorConnect the included AC adapter (GPE248-120200-Z) here. |
Related manuals for Tascam US-1200
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine