Tascam XS-3 Owner's Manual
                                | |
English Important Safety Precautions2 TASCAM XS-3TO THE USERThis equipment has been tested and found tocomply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonableprotection against harmful interference in a resi-dential installation. This equipment generates,uses, and can radiate radio frequency energyand, if not installed and used in accordance withthe instructions, may cause harmful interferenceto radio communications.However, there is no guarantee that interferencewill not occur in a particular installation. If thisequipment does cause harmful interference toradio or television reception, which can be deter-mined by turning the equipment off and on, theuser is encouraged to try to correct the interfer-ence by one or more of the following measures.a) Reorient or relocate the receiving antenna.b) Increase the separation between the equip-ment and receiver.c) Connect the equipment into an outlet on acircuit different from that to which thereceiver is connected.d) Consult the dealer or an experiencedradio/TV technician for help.CAUTIONChanges or modifications to this equipment notexpressly approved by TEAC CORPORATIONfor compliance could void the user's authority tooperate this equipment.For U.S.AIMPORTANT (for U.K. Customers)DO NOT cut off the mains plug from thisequipment. If the plug fitted is not suitable for the powerpoints in your home or the cable is too short to reach a powerpoint, then obtain an appropriate safety approved extensionlead or consult your dealer.If nonetheless the mains plug is cut off, removethe fuse and dispose of the plug immediately,to avoid a possible shock hazard by inadvertent connectionto the mains supply.If this product is not provided with a mains plug, or one hasto be fitted, then follow the instructions given below:IMPORTANT. DO NOT make any connection to the largerterminal which is marked with the letter E or by the safetyearth symbol ç or coloured GREEN or GREEN-and-YEL-LOW.The wires in the mains lead on this product are coloured inaccordance with the following code:BLUE : NEUTRALBROWN : LIVEAs these colours may not correspond with the colouredmarkings identifying the terminals in your plug proceed asfollows:The wire which is coloured BLUE must be connected to theterminal which is marked with the letter N or colouredBLACK.The wire which is coloured BROWN must be connected tothe terminal which is marked with the letter L or colouredRED.When replacing the fuse only a correctly rated approved typeshould be used and be sure to re-fit the fuse cover.IF IN DOUBT — CONSULT A COMPETENT ELECTRI-CIAN. |
Related manuals for Tascam XS-3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine