Tascam XS-3 Owner's Manual
                                | |
2. Features and controls EnglishTASCAM XS-3 7u MIC INPUT (balanced TRS connector)Connect the microphone to this connector.Connections are as follows:HOT: TipCOLD: RingGND: SleeveIf you connect the unbalanced microphone tothis connector, we recommend that cold (Ring)short-circuited to GND (Sleeve).i PHONO INPUTS (unbalanced RCA jacks)Connect the turntables equipped with the MM car-tridge.Never connect any other type of equipment tothe PHONO connectors.o LINE INPUTS (unbalanced RCA jacks)Connect the line level equipment, such as CD players,cassette decks, DAT, MD, etc.p GND terminalIf the turntables are fitted with grounding wires, con-nect these to this GND terminal to reduce noise andhum.a REC OUTPUT (unbalanced RCA jacks)Outputs the pre MASTER 1/2 signal.For example, to connect the recorder to these jacks,you can record your live performance without MAS-TER LEVEL control.s MASTER OUTPUT (unbalanced RCAjacks)Outputs the master output signal adjusted by MAS-TER control.d MASTER OUTPUT (balanced TRS connec-tor)Outputs the master output signal adjusted by MAS-TER control.Connections are as follows:HOT: TipCOLD: RingGND: SleeveWARNINGNOTEf C.F STARTConnect a device which supports fader start operation.Crossfader start function can be set to enable or dis-able on either side independently.Moving the cross-fader to start and/or stop (back cue)the PGM A or B source automatically.When you use this function, make sure to con-nect audio signal and fader start signal to thesame XS-3.Fader start signal is output from Tip terminal.Fader stop (back cue) signal is output from sleeveterminal.g POWER switchh AC Adaptor inUse this jack to connect the PS-P3X AC adaptor whichcomes with your XS-3.When inserting the AC adaptor into the unit, pleasemake sure to align the arrow mark of the AC adaptorplug to the white dot mark on the rear panel.DO NOT use any adaptors with the XS-3 exceptthe PS-P3X adaptor which comes with the XS-3.2.4. Front Panelj PHONESConnect your headphone to this jack.k C.F START BSets the crossfader start B on/off.l C.F START ASets the crossfader start A on/off.If C.F REVERSE switch is set to ON, crossfaderstart operation is set to reversal.NOTEWARNINGNOTE |
Related manuals for Tascam XS-3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine