Teac P-70 Owner's Manual
Also see for P-70: Service manual
23ENGLISHTroubleshootingIn case of any trouble with this unit, please take the time to lookthrough this chart and see if you can solve the problem yourselfbefore you call your dealer or a TEAC service center.The power does not turn one Check that the AC power cord is connected securely.There is no sounde Check the connections between the D/A converter and theamplifier.e Check the settings of the D/A converter and the amplifier.e Switch ON the terminal connecting the D/A converter.The remote control unit does not functione Switch ON the power supply of the player.e Check the batteries. If they are dead, change both of them tothe new ones.e If there are obstructions between the player and the remotecontrol unit, you cannot use the remote control unit. Makesure you have a clear line of sight within seven meters of theplayer, and the remote control unit is pointing at the player.Even though you load a disc, you cannot play back the disce If the anti-vibration clamp is locked, playback is notpossible. After removing any disc and switching off thepower, remove the anti-vibration clamp.e Make sure the disc is right way up (label up).e If the disc is dirty, clean it.e CD-RW discs cannot be played back on this player.e Depending on the disc, etc. it may not be possible to playback CD-R discs. Try again with another disc.e You cannot play back unfinalized CD-R discs. Finalize such adisc in a CD recorder and try again.You cannot use programmed playbacke When the power is turned off or the disc tray is opened andclosed, programming is erased. If this has happened byaccident, re-program the playback.You can play back one track onlye When “SINGLE” is lit, cancel single playback mode bypressing SINGLE of the remote control unit.If the sound skipse When the player is subject to vibration, the sound will skip.Resite the player in a stable location.e If the disc is dirty, clean it.If normal operation cannot be recovered, unplug the power cordfrom the outlet and plug it in again. This resets the internalmicro-computer which can be disturbed during electricalstorms, power interruptions, et cetera.SpecificationsPickupDrive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . linear motor driveType . . . . . . . . . . . . . . . objective lens drive, optical three beamsLens drive method . . . . . . . . . . . . two-dimensional parallel driveLight source . . . . . . . . . . . . . . . . . . . . . . . . . . semiconductor laserWavelength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 780nmDigital output formatsBase sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 44.1kHzFrequency precision . . . . . . . . ±50PPM (indication: ±1.000PPM)Quantization bits. . . . . . . . . . . . . . . . . . . . . . 16 bits linear/channelTransfer rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.072Mb/sec.A type modulation. . . . . . . . . . . . . . . . . biphase, mark modulationBase sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . 88.2kHzFrequency precision . . . . . . . . ±50PPM (indication: ±1.000PPM)Quantization bits. . . . . . . . . . . . . . . . . . . . . . 24 bits linear/channelTransfer rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.144Mb/sec.A type modulation. . . . . . . . . . . . . . . . . biphase, mark modulationBase sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . 176.4kHzFrequency precision . . . . . . . . ±50PPM (indication: ±1.000PPM)Quantization bits. . . . . . . . . . . . . . . . . . . . . . 24 bits linear/channelTransfer rate . . . . . . . . . . . . . . . . . . . . 6.144Mb/sec. (double wire)A type modulation. . . . . . . . . . . . . . . . . biphase, mark modulationDigital output terminalsRCA (COAXIAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5Vp-p/75 ohmXLR (BALANCED). . . . . . . . . . . . . . . . . . . . . . . . . . 4.5Vp-p/110 ohmOPTICAL(TOS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . –12.5 ~ –16dBmWord synchronization input formatBNC . . . . . . . . . . . . 44.1kHz, 88.2kHz rectangular 4.5Vp-p/75 ohmGeneralPower supply . . . . . . . . . . . . . . . . . AC 230V, 50Hz (Europe model)AC 120V, 60Hz (U.S.A./Canada model)AC 220V, 60Hz (Korea model)Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25WDimension (WxHxD) . . . . . . . . . . . . . . . . . . . . 465 x 162 x 355(mm)Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . about 25 kgRemote control unitType . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . infrared pulse systemBattery . . . . . . . . . . . . . . . . . . . . . . . DC3V (AA battery, SUM-3 x 2)Dimensions (WxHxD) . . . . . . . . . . . . . . . . . . . . . . 57 x 21x 216(mm)Weight. . . . . . . . . . . . . . . . . . . . . . about 320g(including batteries)Accessories included with the playerPower cord x 1, Remote control unit x 1,Batteries (AA, SUM-3) x 2, Metal tool for releasing andsecuring the anti-vibration clamp x 1, felt sheet x 3,Warranty card x 1, Owner's Manual x 1The specifications and external appearance of the unit may differfrom those given in this manual, and are subject to changewithout prior notice. |
Related manuals for Teac P-70
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine