Terex Genie GS-2669DC Operator's Manual

Also see for Genie GS-2669DC: Operator's manual Operator's manual

Contents

Terex Genie GS-2669DC Operator's Manual Manual pdf 48 page image

Operator's Manual First Edition • Fifth PrintingTransport and Lifting Instructions46 GS™-2669DC • GS™-3369DC • GS™-4069DC Part No. 215595GTTrans port and Lifti ng Instr ucti onsObserve and Obey: Genie provides this securement information asa recommendation. Drivers are solelyresponsible for making sure machines areproperly secured and the correct trailer isselected pursuant to US Department ofTransportation regulations, other localizedregulations, and their company policy. Genie customers needing to containerize anylift or Genie product should source a qualifiedfreight forwarder with expertise in preparing,loading and securing construction and liftingequipment for international shipment. Only qualified aerial lift operators should movethe machine on or off the truck. The transport vehicle must be parked on alevel surface. The transport vehicle must be secured toprevent rolling while the machine is beingloaded. Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. Genie lifts are very heavyrelative to their size. See the serial label for themachine weight. The machine must be on a level surface orsecured before releasing the brakes. Do not drive the machine on a slope thatexceeds the uphill, downhill or side slope rating.See Driving on a Slope in the OperatingInstructions section. If the slope of the transport vehicle bedexceeds the maximum slope rating, themachine must be loaded and unloaded using awinch as described in the brake releaseoperation.Free-wheel Configuration forWinchingChock the wheels to prevent the machine fromrolling.All models: Release thewheel brakes by turning overthe two rear torque hubdisconnect caps.Be sure the winch line isproperly secured to the drivechassis tie points and thepath is clear of allobstructions.Reverse the procedures described to re-engagethe brakes.Chock the wheels to prevent the machine fromrolling.