Terex Z-30/20N Operator's Manual

Also see for Z-30/20N: Maintenance manual Maintenance manual Maintenance manual Operator's manual Service and repair manual

Contents

Operator's Manual Fifth Edition • Second Printing22 Z-30/20N • Z-30/20N RJ Part No. 133546OPERATING INSTRUCTIONSEmergency StopPush in the red Emergency Stop button to the offposition at the ground or platform controls to stopall machine functions.Repair any function that operates when the redEmergency Stop button is pushed in.Selecting and operating the ground controls willoverride the platform red Emergency Stop button.Auxiliary ControlsUse auxiliary power if the primary power sourcefails.1 Be sure both battery packs are connectedbefore operating the machine.2 Turn the key switch to ground or platformcontrol.3 Pull out the red Emergency Stop button to theon position.4 Press down the foot switch when operating theauxiliary controls from the platform.5 Simultaneously hold theauxiliary power switch on andactivate the desired function.The boom, steer and drive functions will operatewith auxiliary power.Operation from Ground1 Be sure both battery packs are connectedbefore operating the machine.2 Turn the key switch to ground control.3 Pull out the red Emergency Stop button tothe on position.To Position Platform1 Hold the function enable switch toeither side.2 Move the appropriate toggle switch according tomarkings on the control panel.Drive and steer functions are not available from theground controls.Operation from Platform1 Be sure that both battery packs are connectedbefore operating the machine.2 Turn the key switch to platform control.3 Pull out both ground and platform redEmergency Stop buttons to the on position.To Position Platform1 Set the boom function speed controller to thedesired speed.Note: Drive and steer functions are not affected bythe boom function speed controller.2 Press down the foot switch.3 Move the appropriate toggle switch according tothe markings on the control panel.To Steer1 Press down the foot switch.2 Turn the steer wheels with the thumb rockerswitch located on top of the drive controlhandle.Use the color-coded direction triangles on theplatform controls and the drive chassis to identifythe direction the wheels will turn.