T+A PA1230 R User Manual

T+A PA1230 R User Manual Manual pdf 33 page image

33Approved usageThis device is designed exclusively for reproducingsound and/or pictures in the domestic environment. It isto be used in a dry indoor room which meets all therecommendations stated in these instructions.Where the equipment is to be used for other purposes,especially in the medical field or any field in which safetyis an issue, it is essential to establish the unit’s suitabilityfor this purpose with the manufacturer, and to obtainprior written approval for this usage. equipment which includes a radio or televisionreceiving section must be operated within the stipula-tions laid down by the Post Office and the Telecommuni-cations authorities in the country in which it is used.This unit may only be used to receive or reproduce thosetransmissions which are intended for public reception. Thereception or reproduction of other transmissions (e. g.police radio or mobile radio broadcasts) is prohibited. The only permissible method of disposing ofthis product is to take it to your local collectioncentre for electrical waste.Changing the batteriesTo open the battery compartment disconnect the latchby pressing in, then lift the cover out. Remove the oldcells and fit three new dry cells of the LR 03 (MICRO)type in the battery compartment, taking care to fit themwith correct polarity. Please remember that all the cellsmust be replaced at the same time.Note:If you have already reset the remote control system toAddress 2, you will need to repeat the change procedureafter fitting new batteries.Disposing of exhausted batteriesExhausted batteries must never be thrown into thehousehold waste! They should be returned to the bat-tery vendor (specialist dealer) or your local toxic wastecollection point, so that they can be recycled or disposedin a proper way. Most local authorities provide collectioncentres for such waste, and some provide pick-up vehi-cles for old batteriesCare of the unit.Disconnect the mains plug at the wall socket before clea-ning the case.The surfaces of the case should be wiped clean with asoft, dry cloth only.Never use solvent-based or abrasive cleaners!Before switching the unit on again, check that there are noshort-circuits at the connections, and that all cables areplugged in correctly.Approval and conformity with ECdirectivesIn its original condition the unit meets all currently validEuropean regulations. It is approved for use as stipula-ted within the EC.By attaching the CE symbol to the unit  declares itsconformity with the EC directives 89/336/EEC, amendedby 91/263/EEC, amended by 93/68/EEC, and also73/23/EEC, amended by 93/68/EEC and the nationallaws based on those directives.The original, unaltered factory serial number must bepresent on the outside of the unit and must be clearlylegible! The serial number is a constituent part of ourconformity declaration and therefore of the approval foroperation of the device.The serial numbers on the unit and in the original documentation supplied with it (in particular the inspec-tion and guarantee certificates), must not be removed ormodified, and must correspond.Infringing any of these conditions invalidates  con-formity and approval, and the unit may not be operatedwithin the EC. Improper use of the equipment makes theuser liable to penalty under current EC and nationallaws.Any modifications or repairs to the unit, or any otherintervention by a workshop or other third party not autho-rised by , invalidates the approval and operationalpermit for the equipment.Only genuine  accessories may be connected to theunit, or such auxiliary devices which are themselvesapproved and fulfil all currently valid legal requirements.When used in conjunction with auxiliary devices or aspart of a system this unit may only be used for the pur-poses stated in the section 'Approved usage'.FCC Information to the user(for use in the United States of America only)Class B digital device – instructions:Note: This equipment has been tested and found tocomply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection againstharmful interference in a residential installation. Thisequipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accor-dance with the instructions, may cause harmful interfer-ence to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful inter-ference to radio or television reception, which can bedetermined by turning the equipment off and on, the useris encouraged to try to correct the interference by one ormore of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment andreceiver.- Connect the equipment into an outlet on a circuit dif-ferent form that to which the receiver is connected.- Consult the dealer or an experienced radio/TV techni-cian for help.