PAGE 4 OF 8 0224 IH-7876ASSEMBLY CONTINUED5. Install two leveler brackets (V) with threads at bottominto left side panel using four #8 x 1/2" screws (W) oneach leveler. Install half drawer slide (X) into left sidepanel using three #8 x 1/2" screws. (See Figure 5)6. Install two hinge mounting plates (BB) into left sidepanel using two #6 x 1/2" screws (LL) on each mount.(See Figure 6)7. Repeat steps 4-6 for the right side panel.8. Insert two cam locks (S) and four dowels (U) intolower back panel (E). Repeat for upper back paneland cross support panel. (See Figure 7)9. Attach left side drawer panel (L) to back drawerpanel (N) using two 5 x 40 mm screws (Y). Repeatfor right drawer panel (M) on opposite side.(See Figure 8)10. Insert bottom drawer panel (O) into grooves onside panels. Align inner front panel (K) groove withbottom drawer panel and secure to side panelswith four 5 x 40 mm screws (Y). (See Figure 9)Figure 6Figure 7Figure 8Figure 9Figure 5XWW VLLBBSU EKOYNMYL

U-Line H-7876 Manual