UBI EasyCoder 91 Installation & Operation Manual

Also see for EasyCoder 91: User manual

UBI EasyCoder 91 Installation & Operation Manual Manual pdf 23 page image

23UBI EasyCoder 91 – Installation & Operation Ed. 1Chapter 3 OperationThe EasyCoder 91 is controlled by the operator by meansof a power switch, a “Feed” key and a multi-colour in-dicator lamp.Power SwitchThe power switch is located on the right side of theprinter.Indicator LampWhen the power to the printer is switched on, the indi-cator lamp will glow green if the printer is loaded withpaper and – in case of thermal transfer printing – ribbon.If the printer is out of paper and/or ribbon, the indicatorlamp will glow red.Any error condition, such as label stop sensor problems,paper jams or software errors, will be indicated by thelamp changing to orange.If the indicator lamp fails to work as described above,please refer to chapter 5 “Troubleshooting” .OperationControls andIndicatorsChapter 3Colour MeaningGreen Power onPaper loadedRibbon loaded 1Red Power onOut of paper, orOut of ribbon 1Orange Power onError detectedDark Power Off1/. TT printing onlyEasyCoder 91PowerFeedPower SwitchIndicator LampFeed Key