111UniFi Controller User GuideUbiquiti Networks, Inc. Chapter 14: Client DetailsWireless Client – ConfigurationConfigAlias Allows you to change the hostname of the client.Note Allows you to enter comments about the client.Once saved, the client will be designated as a “Noted”client on the Insights > Known Clients tab.User Group Allows you to assign the client to a UserGroup. User Groups are set up under the Settings tab >User Groups option (see “Settings > User Groups” onpage 34 for more information). The default User Groupis Automatic.Save Click Save to apply changes.IP ConfigFixed IP Select this option to assign a static IP address tothe client, and configure the settings below. If you wantthe local DHCP server to assign an IP address to the client,remove the checkmark.• Network Select the appropriate network from thedrop-down list.• IP Address Enter the local IP address.Apply Click Apply to save changes.Wired Client – DetailsMAC Address Displays the MAC address or uniquehardware identifier of the client.Hostname Displays the customizable name or identifierof the client.Device Type Displays the type of device.IP Address Displays the local IP address of the client.Uptime Displays the duration of time the client has beenconnected.Network Displays the network used by the client.Port Displays the name and port of the UniFi devicebeing used by the client. You can click the name to getadditional details on the UniFi device.Wired Client – StatisticsOverviewActivity Displays the level of activity in Bytes per second.Down Pkts/Bytes Displays the amount of datadownloaded as packets and bytes.Up Pkts/Bytes Displays the amount of data uploaded aspackets and bytes.