139UniFi Controller User GuideUbiquiti Networks, Inc. Appendix D: UniFi EDU Mobile AppAppendix D: UniFi EDUMobile AppOverviewYou can use the UAP-AC-EDU to broadcastannouncements with clarity from your mobile device.Use the UniFi EDU app to broadcast announcements fromthe UAP-AC-EDU.Requirements• UniFi Controller software v4.9.5 or higher• UAP-AC-EDU firmware v3.4.18 or higher• A compatible Android or iOS device located on the sameLayer-2 network as the UniFi Controller and UniFi APsThe following instructions describe the iOS version of theapp; however, the Android version is similar.1. Download the UniFi EDU app from the App Store (iOS)or Google Play (Android).2. Launch the app.3. Enter the following information:• (IP address) Enter the IP address of the UniFiController.• (port) Enter the appropriate port number, which istypically 8443.Note: If you do not know the IP address, you canclick Find to detect a UniFi Controller and thenselect it.• (username) Enter your username for the UniFiController.• (password) Enter your password for the UniFiController.• Remember username and password Tap thisoption if you want the app to remember yourusername and password.Tap Connect.The UniFi EDU app includes five tabs:• Broadcast (see below)• “Schedule” on page 137• “Recordings” on page 142• “Volume” on page 143• “Settings” on page 143BroadcastYou can organize the UniFi AC EDU APs into multiplebroadcast groups.To create a broadcast group, follow these instructions:1. Click .2. Enter a descriptive name in the Group Name field.3. Tap the appropriate UniFi AC EDU APs.4. Tap Save to apply your changes, or tap Cancel todiscard your changes.