79UniFi Controller User GuideUbiquiti Networks, Inc. Chapter 10: UniFi Security Gateway DetailsUniFi Security Gateway –ConfigurationClick Configuration to configure the alias, WANsettings, port forwarding, Dynamic DNS, and customupgrade entries. You can also remove the Gateway frommanagement by this UniFi Controller.GeneralAlias Displays the customizable name or identifier of theGateway. The Alias is also known as the host name.Save Click Save to apply the change.WAN 1/2Connection Type Select the Internet connection type foryour service.• Using DHCP The use of the Dynamic HostConfiguration Protocol (DHCP) is the default. TheGateway automatically acquires network settings fromthe service provider’s DHCP server.- Preferred DNS Enter the IP address of the serviceprovider’s primary DNS server.- Alternate DNS Enter the IP address of the serviceprovider’s secondary DNS server.• Static IP The service provider assigns fixed networksettings to your service for manual entry. Enter thefollowing information:- IP Address Enter the Internet IP address of theGateway.- Subnet Mask Enter the subnet mask of the Gateway.- Router Enter the IP address of the service provider’sgateway router.- Preferred DNS Enter the IP address of the serviceprovider’s primary DNS server.- Alternate DNS Enter the IP address of the serviceprovider’s secondary DNS server.
