ULEAD VIDEOSTUDIO USER GUIDE18Checking the hardware setupAfter connecting your analog source to the capture or tuner card, check if the cardis detected by your Windows system.To check if the capture or tuner card is detected:1. If you are using a video device such as a camcorder as your source, insert yourvideotape into the video device and switch it on. Make sure it is in the playbackmode (usually named VTR or VCR).2. Open the Control Panel, then open System: Hardware - Device Manager.3. In the Device Manager, double-click Sound, video and game controllers.Check if your capture or tuner card is listed in this folder.4. If your capture or tuner card has been detected properly, it will be listed as asource device in VideoStudio's Options Panel. In VideoStudio, select theCapture Step and check if your capture or tuner card is displayed under theSource list in the Options Panel.USB cameraTo capture live video and still images from a USB camera, connect the camera to anavailable USB port on your computer.USB cameras may require installation of a device driver, depending on the Windowsversion you are using. For information on how to install your USB camera, refer toits accompanying manual.After properly installing your USB camera, check if it is detected by your Windowssystem.To check if the USB camera is detected:1. Open the Control Panel, then open System: Hardware - Device Manager.2. In the Device Manager, double-click Imaging devices. Check if your USBcamera is listed in this folder.Note: If your capture device supports multiple video sources, the Video and AudioCapture Property Settings dialog box allows you to select your desired videosource such as Composite, Tuner, or S-Video. Likewise, if you have multiple audiosources, this dialog box allows you to select your desired audio source.
