Ultra Start 15 SERIES Install Manual

Also see for 15 SERIES: Owner's guide Owner's guide

Contents

Ultra Start 15 SERIES Install Manual Manual pdf 8 page image

Page 8INSTALLATION MANUAL REMOTE VEHICLE STARTER6-pin Description Test For Wire1-Yellow 30amp Starter Output This wire will test 0volts in off, accessory and inthe ignition position.12volts during start only.2-Green 30amp Heat/Acc Output This wire will test 0volts in the off position 12-14volts in the accessory and run positions and0 volts during start3-Red 30amp Power Input 12volts at ignition harness or from battery.Supplies power for the ignition, selectable outputand park light relays.4-Red 30amp Power Input 12volt power at ignition harness or from battery.Supplies power for accessory and start relays5-Blue 30amp Ignition Output This wire will test 0volts in the off and accessoryposition 12volts in the ignition, start and run.6-White 30amp Select Output Selectable output for 2nd Ign, acc or starter.14 pin connectorPin Number Function Description1-Yellow Re-Arm 0.75 second Pulsed output when locked and on remote startshutdown. Used for factory alarm re-arm. Programmableoutput. See Menu 32-Orange St.kill and Negative output when locked and during remote start.Anti-Grind Used for optional starter disable, and anti-grind relay.Programmable output. See Menu 33-Brown Disarm 0.75sec pulsed output when Unlocked and pulse beforeremote start activation. Used for Factory Alarm Disarm.4-Red/Wht Trunk Hold the unlock button for 3 seconds. Output will stay onuntil the unlock button is released (Max 5 seconds)Programmable to -Park lights. See Menu 25-Wht/Violet GWR (-) Output while remote starter is activated. Used toactivate Anti-theft bypass modules.6- Green (-) Door Pin Input to detect door opening. Connect to door pin thatswitches to Negative when the door is opened.7-Green/ Hood Pin Negative input from hood pin safety switch. Switch isWhite grounded when the hood is opened. Must be connected.8-Purple (+) Door Pin Input to detect door opening. Connect to door pin thatswitches to 12volts when the door opened.9-Pink Brake input Positive Brake Input. Used to detect the brake switchbeing applied. Found at the brake switch connector.10-Black Ground System Chassis Ground Input..6 Pin Power Connector