Ultra Start 450 SERIES Owner's Manual
Also see for 450 SERIES: Owner's guideInstall guide
            | |
SHOCK SENSOR ADJUSTMENTS3 CHIRPSPress & HOLD Lock + Unlock buttons at the same timePress & HOLD Lock + Unlock buttons at the same time(NOTE: Shock Sensor Adjustment Mode has an auto time out of8 seconds)Each time the lock button is pressed and released the sensitivity willdecrease by 1 level.This is confirmed by a series of park light flashes & Siren Chirps1 Flash / Chirp is the least sensitive setting10 Flashes / Chirps is the most sensitive settingEach time the unlock button is pressed and released the sensitivity willincrease by 1 level.This is confirmed by a series of park light flashes & Siren Chirps1 Flash / Chirp is the least sensitive setting10 Flashes / Chirps is the most sensitive settingContinue to hold for 3-5 seconds Until Siren Chirps 3 times(Note: System will Arm or Disarm via silent arming prior toentering adjustment mode)1 - ENTER SHOCK SENSOR ADJUSTMENT MODE2 - ADJUSTING SENSOR3 - EXITING SENSOR ADJUSTMENT MODE++ADDITIONAL LED FUNCTIONSWhile the system is disarmed and the ignition is in the off position, theLEDs will activate from the following triggers.1) If the door is opened the LEDs will stay on until the door is closed.2) If the hood is opened the LEDs will stay on until the hood is closed.3) If the shock sensor detects vibration the LEDs will turn on momentarily.4) If the auxiliary sensor input is activated the LEDs will activate momentary.SYSTEM PROGRAMMING - Menu 1PAGE 10450 SERIESOWNER'S MANUAL SHOCK SENSOR |
Related manuals for Ultra Start 450 SERIES
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine