Ultra Start 450 SERIES Owner's Manual
Also see for 450 SERIES: Owner's guideInstall guide
            | |
ACTIVATE TRUNK RELEASE1 Press then HOLD the Disarm / Unlock button on the remote.2 The park lights will flash and the siren will chirp two times.3 The doors will unlock and the Starter Disable will deactivate. (optional)4 The LEDs will stop flashing.5 - Continue to HOLD until siren chirps again and trunk activates6 - Release ButtonNOTES:- For safety, the trunk release will not active when ignition key is ON.PRESS & HOLD1 Press and release the Arm/ Lock button on the remote transmitter.2 The park lights will flash and the siren/ horn will chirp one time.3 The doors will lock and the Starter Disable will activate. (optional)4 The LED will start flashing within five seconds.5 Once Armed, the alarm can be triggered by the shock sensor (impact tovehicle), door inputs (opening door / hood), turning on ignition.NOTES:- If a door is open or delay dome light is 30 seconds after arming, system with chirp 3times to indicate door input is bypassed until door is closed or dome light turns off.- If system is programmed for silent arming, siren will not chirp when arming, but parklights will still flash.- If system is in valet mode, doors will lock, but siren will not chirp and lights will not flash.LED indicator will be on solid.See Valet / Service Mode in this manual for further informationARM SYSTEM / LOCK DOORSPRESS & RELEASESYSTEM PROGRAMMING - Menu 1PAGE 6450 SERIESOWNER'S MANUAL TRANSMITTER FUNCTIONS |
Related manuals for Ultra Start 450 SERIES
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine