54setting time and then automatically resumes scanning. (Default= 2 seconds)1. Press Func then Pgm/E in Service, Custom, or QuickSearch/Search Hold mode to view the Search menu.2. Scroll to Set Delay and press Pgm/E.3. Turn SCROll CONTROl to select the delay time from thefollowing options:• -10 sec - resumes after 10 seconds.• -5 sec - resumes after 5 seconds.• 0 sec - resumes immediately.• 1 sec - waits 1 second for a reply then resumes.• 2 sec - waits 2 seconds for a reply then resumes.• 3 sec - waits 3 seconds for a reply then resumes.• 4 sec - waits 4 seconds for a reply then resumes.• 5 sec - waits 5 seconds for a reply then resumes.4. Press Pgm/E to save and return to previous menu.CTCSS/DCS SearchThis setting controls whether the scanner will search for asubaudible tone when it stops on a transmission during aService Search. (Default = On)1. Press Func then Pgm/E in any Service, Custom, or QuickSearch/Search Hold mode to view the Search menu.2. Turn SCROll CONTROl to CTCSS/DCS Search andpress Pgm/E.
