198 Call recordingAutomatic call recordingThis is the simplest mode. If you have accepted a call or called a subscriber andthe subscriber answers, the call is recorded automatically. Refer to Page 196to check which calls this can be.As soon as the recording starts, you will see the recording symbol | and heara beep (see also Page 196).You cannot pause the recording manually in this mode.Manual call recordingActivating or deactivating call recording when the telephone is inidle mode.Prerequisite: Manual mode is selected. The recording button is configured andindicates the status.Select the option shown in the telephone's context menu to enable the option.or disable the option.orS Press the recording button to enable the option - the LED key lights up.R or press the key shown to disable the option - the LED extinguishes.The recording button also indicates the status change if you activated or deacti-vated call recording via the context menu.Call recording with AutoStartStandby mode is activated in principle in idle mode. The recording button LEDlights up. You cannot switch off the recorder. As soon as a call is set up, call re-cording starts automatically.^ Lift the handset.orn Press the key shown.[ The station answers. You hear a beep, the recording symbol | is shown on thedisplay and the recording button LED remains lighting. The call is now being re-corded (see also Page 196)You can pause the recording at any time and continue it again.] or n If you end the call, the AutoStart process is set up again for the next call.Recording onRecording off
