195 SETTING OF FUNCTIONS19SETTING OF FUNCTIONSChapter55-8. Hold mode■Sample (The arbitrary points are held.)< Timing chart >t1: Time from when the hold signal is inputted to when the indicated value is heldt2: Time from when the hold signal is cancelled to when the indicated value returns to trackingt3: Minimum reset signal width required for canceling the hold■Peak (The maximum point is held.)< Timing chart >t1: Time from when the hold signal is inputted to when the indicated value is heldt2: Time from when the hold signal is cancelled to when the indicated value returns to trackingt3: Minimum reset signal width required for canceling the holdt4: Time after updating a hold value until it holds* HOLD LED is blinked after HOLD start for the 1st time.TimeIndicated valueSensor input valueHOLDinputOFFONt1 to t3: MAX 20mSt2t3t1HoldON OFFOFFHOLDLEDTimeIndicated valueSensor input valueHOLDt2t3t4t1inputOFFONt1 to t3: MAX 20mSDetectionON OFFOFFHOLDLED blinkingONblinkingt4: Approx. 0.5sHoldHoldt4Detection
