Unipulse F331 Operation Manual

Contents

Unipulse F331 Operation Manual Manual pdf 74 page image

657 OPTION65OPTIONChapter7■Continuous transmission formats- Transmission format 1- Transmission format 2■Setting value LOCK/ Calibration value LOCKThis function to avoid change of setting values and calibration values.0: OFF (Unlocked state)1: ON (Locked state)*1 O : Overload (LOAD, OFL)H : Under a hold/ Under a judgmentOrder of priority: H > O*4 H : HH limit ONL : LL limit ONG : HH limit and LL limit OFFN : HH limit and LL limit ONF : Comparison OFFOrder of priority: N, F > (H or L) > G*2 G : OK ONN : NG ONF : Comparison OFFOrder of priority: F > (G or N)*5 N : Near zero OFFZ : Near zero ON*3 H : HI limit ONL : LO limit ONG : HI limit and LO limit OFFN : HI limit and LO limit ONF : Comparison OFFOrder of priority: N, F > (H or L) > G*6 Decimal place0 : None1 : 0.02 : 0.003 : 0.0000 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19G S ,*1 *2 *3 *4, , , , ±*5 ,20 21Sign+ or - 5-digit linked with indicated value+decimal pointDelimiter0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21W T *1 *2 *3 *4 ±Sign＋ or －*5SOH STX ETX BCCSign＋ or －±*622 23005-digit linkedwith indicated value5-digit not linkedwith indicated valueBCC calculation targetEach ASCII code of SOH, STX, and ETXSOH: 01STX: 02ETX: 03BCC calculation methodEach code targeted for BCC calculation isexpressed in hexadecimal notation, and the resultof XOR with all data enters BCC.