Copyright 2012 unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of unitech Electronics Co., Ltd.547.9 Setup InsertionTo setup the insertion of output characters1. Scan the label of the desired set.2. Scan the label of the desired symbology.3. Go to the Decimal Value Tables in Appendix A, scan label(s) that represents thedesired position to be inserted.4. Scan the “Complete“ label of “Character Position to be Inserted“.5. Go to the ASCII Tables in Appendix B or Function Key Tables in Appendix C, scanlabel(s) that represents the desired characters to be inserted.6. Scan the “Complete“ label of “Characters to beInserted“.7. Repeat the steps 1 - 6 to set additional insertion.A Select Insertion Set Number1st Set2nd Set3rd Set4th Set5th Set6th Set
