-25--26-BATCH MODEFor MS912M+ onlyDATA FORMATExample:To change Data Format to, , 1. Scan [Data Format]2. Scan [4], [2], [3] on page 11.3. Scan [Data Format]The default Data Format is , below are all items available for display and their codes:For MS912M+ onlyDefault is comma (,) . You may replace it with any alphanumericcharacters from the full ASCII table in User’s Manual (on www.ute.com).Example: To change Field Separator to Semicolon (;)1. Scan [Field Separator]2. Scan [;] from the full ASCII table.3. Scan [Field Separator]. R010$*.R010$*FIELD SEPARATOR. R011$*.R011$*DATA FORMAT24DateBarcode DataCodeItemCodeItem3TimeAfter scanning the above barcode, the scanner will be able to collect barcodedata off-line. The barcode data will be stored in the format of:<Date>, <Time>, <Barcode Data> <CR>To retrieve stored data, please connect the scanner to the host with cable,access removable storage device “MiniScan” from which you may openor copy the file “BARCODE.txt” to your computer.To delete ONE stored data, please scan below barcode :. R005$*.R005$*. C035$*.c035$*BATCH MODEDELETE LAST DATATo delete ALL stored data, simply delete the file “BARCODE.txt” in theremovable storage device “MiniScan” until you hear two beeps.
