- 30 -Laser On TimeParameter # 0x88This parameter sets the maximum time decode processing continues during ascan attempt. It is programmable in 0.1 second increments from 0.50 to 25.5seconds.To set a Laser On Time, scan the bar code below. Next scan two numeric barcodes beginning on page 77 that correspond to the desired on time. Singledigit numbers must have a leading zero. For example, to set an on time of 0.5seconds, scan the bar code below, then scan the "0", "5" and "0" bar codes; toset an on time of 10.5 seconds, scan the bar code below, then scan the "1", "0"and "5" bar codes. To change the selection or cancel an incorrect entry, scanCancel on page 78.
