Unitech MS916 User Manual

Also see for MS916: User manual Quick start guide User manual Quick start guide Quick start guide

Unitech MS916 User Manual Manual pdf 58 page image

- 55 -Set Lengths for Code 11Parameter # L1 = 0x1C, L2 = 0x1DThe length of a code refers to the number of characters (i.e., human readablecharacters), including check digit(s) the code contains. Set lengths for Code 11to any length, one or two discrete lengths, or lengths within a specific range.• One Discrete Length - Select this option to decode only Code 11symbols containing a selected length. Select the length using thenumeric bar codes beginning on page 77. For example, to decodeonly Code 11 symbols with 14 characters, scan Code 11 - OneDiscrete Length, then scan 1 followed by 4. To correct an error or tochange the selection, scan Cancel on page 78.• Two Discrete Lengths - Select this option to decode only Code 11symbols containing either of two selected lengths. Select lengthsusing the numeric bar codes beginning on page 77. For example, todecode only those Code 11 symbols containing either 2 or 14characters, select Code 11 - Two Discrete Lengths, then scan 0, 2,1, and then 4. To correct an error or to change the selection, scanCancel on page 78.• Length Within Range - Select this option to decode a Code 11symbol with a specific length range. Select lengths using numeric barcodes beginning on page 77. For example, to decode Code 11symbols containing between 4 and 12 characters, first scan Code 11- Length Within Range. Then scan 0, 4, 1, and 2 (single digitnumbers must always be preceded by a leading zero). To correct anerror or change the selection, scan Cancel on page 78.• Any Length - Scan this option to decode Code 11 symbols containingany number of characters within the scan engine capability.