Chapter 3 Getting Connected24 Copyright 2006 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.Synchronizing with Your ComputerSynchronization takes place according to the options you choose while setting upActiveSync on your computer. If you accept the default (On Connect) synchronizationoption in the Microsoft ActiveSync Setup Wizard, you’ll be able to simply connect yourPA600 to your desktop computer and synchronization will take place.If you have not enabled the On Connect feature in Active Sync, you can start Active-Sync in either of the following ways:• On your computer, double-click My Computer → Mobile Devices folder.• Connect the USB cable between the computer and PA600.Connection optionsYou can set remote synchronization with your computer using the following connec-tion options:• USB connection• Bluetooth connection• WiFi connectionUSB ConnectionTo synchronize with your computer using a USB connection:1. Connect your device to your computer using the USB charging cable.2. Initiate connection by tapping Start → Pro-grams → ActiveSync.3. Tap Menu → Connections.4. Check Synchronize all PCs using this connection.Select a baud rate or cable type connection. Tap OK.