Chapter 3 Getting Connected27WiFi ConnectionWith the device’s embedded WLAN module, you can send and receive signals to aWiFi network then synchronize files.NOTE: WiFi access requires a separate purchase of a service contract with awireless service provider. Contact a wireless service provider for moreinformation.A wireless network can be added either when the network is detected or by manuallyentering settings information. Before doing these steps, make sure you enable theWireless function, and determine if authentication information is needed.There are two ways to enable the wireless function:1. Double-tap the WiFi icon, and tap EnableWireless.2. Press Func key and “9” button to bring theDevice Setting screen.Under IO, select Wireless and Enable.WiFi icon